motorhome water pipe venting // niesmann+bischoff - luxury motorhome (model FLAIR) // 2019 // WA2

In this video, we will show you how the water pipe ventilation after refilling the water tank is working. To operate the ventilation, first turn on the water pump at the central panel. After that the single lever mixer of the sink in the kitchen, should be turned on warm water withdraw. This way most air, which accumulates in the boiler can escape. When the water flows continuously, turn the single lever mixer on cold water withdraw. Here you also wait until the water is running evenly. This generally takes two minutes. Finally, check if the water pressure stays constant and if air escapes by turning the mixer from warm to cold. Now the water pipe is ventilated and the water tap is ready to use. More information about the luxury motorhome model FLAIR can be found here: https://www.niesmann-bischoff.com/en/flair/ If you would like to know more about our various campers from Niesmann+Bischoff, please visit us on our homepage: https://www.niesmann-bischoff.com/en/

LicenseDefault alugha License

This project contains product placements

More videos by this producer