motorhome heater // niesmann+bischoff - luxury motorhome (model FLAIR) // 2019 // H2

In this video, we will show you how you can use different settings for the heating. The heating for the body shell can be switched on by the main button at the control panel. In the standard display, you can see the inside temperature, the time with weekdays and sequences of operations, which are shown by symbols at the top of the screen. The power plug symbol indicates that the vehicle is connected to 230 Volt external current. Push the button Menu to operate the heating. To only operate the heating, choose the preferred inside temperature. Then you can choose the operating mode, as an example, the flame symbol indicates gas usage, the lightning symbol indicates electricity usage. When using electricity, you can choose between three different power levels, 1kW, 2kW or 3kW. In general, the electricity heating should be used, when the vehicle is parked at home or in a hall to keep the motorhome at operating temperature. This does not always work on campsites, because most campsites only distribute 6 Amps, which is 1380 Watt and most of the times do not feature 2 or 3kW. The usual operating mode is with 6kW power via gas. This can be activated via the gas flame symbol. When you shower, turn on the warm water boiler with this button. The warm water production can either work with full power or with medium power, which can be seen on the bar graph. When the circulating pump was set to permanent operation, warm water production cannot be turned on. Please only turn the full power on in summer, since the energy for the water temperature is withdrawn from the heating power and in winter the heating decreasing for this period of time. It takes about five minutes until the full power of the heating is available for the boiler. The power will go back to heating mode after ten minutes. If a second person wants to shower, do not forget to press the button a second time. The boiler goes back automatically to rest state after ten minutes. With button “A” you can inquire information about programmed and active functions of the heating. Further functions, which can be set up, such as for example hour, weekday and automatic night setting, are accessed by pressing the button with the wrench symbol. More information can be acquired via the manual. If you would like to turn off the heating, press again on the gas flame symbol. After that, press the Menu button to get back to the standard display and then finally to shut down the central panel with the main button. More information about the luxury motorhome model FLAIR can be found here: https://www.niesmann-bischoff.com/en/flair/ If you would like to know more about our various campers from Niesmann+Bischoff, please visit us on our homepage: https://www.niesmann-bischoff.com/en/

LicenseDefault alugha License

This video contains product placements

More videos by this producer