Wireless switch and receiver: teaching in, teaching out and resettingator

In this video, I'm going to walk you through the process of teaching in, unlearning, and finally performing a complete reset of a steute wireless switch on a steute relay receiver. We'll start by putting our relay receiver into the teach-in mode. I'll show you how to press the Learn button to prepare the receiver for the teach-in process. Here, we choose the channel for the wireless switch - first for channel 3 and then repeat the process for channel 4. After successfully teaching in the switch, we'll check if it was correctly registered. We verify this by observing the relay receiver's LEDs when we actuate the switch. Next, I'll explain how to unlearn a switch. For this, we select the channel from which we want to remove the wireless switch. In our example, we remove the switch from channel 3. I'll show you how to put the receiver into the fast MD mode and successfully unlearn the switch. To reset all settings and remove all switches from the receiver, I'll guide you through the reset process. We press the Learn button again for specific time intervals to delete all switches and restore the default settings. Finally, by actuating the wireless switch, we check that there is no reaction from the receiver, proving that all switches have been successfully removed. So, you've seen how to efficiently manage the steute wireless switch with a few steps - from teaching in to completely resetting.

LicenseDefault alugha License