System check - Part 1: Bearing temperature

Placing your hand on the pump set or using a measuring gun is a quick way to find out the bearing temperature. Rule of thumb: Conditions start to become critical for the pump when temperatures exceed the ambient temperature by 50 °C or more. https://www.ksb.com/single-source-supplier Follow us: FACEBOOK: http://www.facebook.com/KSB.Company TWITTER: https://twitter.com/KSBcompany LINKEDIN: http://www.linkedin.com/company/ksb GOOGLE+: https://plus.google.com/+ksbcompany NEWSLETTER: https://www.ksb.com/ksb-en/Newsletter/

LicenseDefault YouTube License

More videos by this producer

System check – Part 2: Paint flaking off pump and flange

Paint flaked off the pump? This could be a small symptom of a bigger problem: The pump set could be misaligned or worse. https://www.ksb.com/single-source-supplier Follow us: FACEBOOK: http://www.facebook.com/KSB.Company TWITTER: https://twitter.com/KSBcompany LINKEDIN: http://www.linkedin.com/co

System check – Part 3: Bearing bracket leakage

Leakage at the bearing bracket? Just drain the oil, check the gaskets and regulate the oil level – this is all you have to do to avert the risk of bearing damage. https://www.ksb.com/single-source-supplier Follow us: FACEBOOK: http://www.facebook.com/KSB.Company TWITTER: https://twitter.com/KSBcom

System check – Part 4: Rubber abrasion underneath the coupling

A quick glance underneath the coupling is sufficient: If wear to the coupling rubber parts is evident, these can be easily replaced to avoid major damage. https://www.ksb.com/single-source-supplier Follow us: FACEBOOK: http://www.facebook.com/KSB.Company TWITTER: https://twitter.com/KSBcompany LIN